Nitrite, Low Range Photometer Water Resistant W/ CAL CHECK Kit

Nitrite, Low Range Photometer Water Resistant W/ CAL CHECK Kit

This meter kit measures the Nitrogen-Nitrite content in the 0.000 to 0.600 mg/L (ppm) range. This is good testing water for drinking, as well as surface and saline water samples. The Method used is an adaptation of an EPA approved method.

This meter is an auto diagnostic portable microprocessor meter that has an advanced optical system based on a special tungsten lamp and a narrow band interference filter. This allows for very accurate and repeatable readings. This meter is factory calibrated and the advanced design minimizes the need for frequent calibration.

This instrument contains the powerful CAL CHECK validation function which allows you to validate your performance at any time. This whole system is user friendly and with the NIST traceable standards you will be able to verify the performance of the instrument and recalibrate if necessary.

This meter is water resistant and the lamp and filter are protected by a transparent cup, making it ideal for field work. This meter also features an auto-shut off feature that will turn off the instrument after 10 minutes of non-use in measurement mode and after 1 hour of non-use in calibration mode. This meter also has a positive locking system to ensure the cuvets are oriented in exactly the same way each time you test. The meter also allows for cuvets with larger necks to ease the process of adding both reagents and samples.

This kit comes with 2 sample cuvets with caps, a 9V battery, an instruction manual, cuvet cleaning cloth and scissors all in a hard carrying case.

Specifications

• Range: 0.000 to 0.600 mg/L (as NO2--N)
• Resolution: 0.001 mg/L
• Precision: +-0.001 mg/L to 0.100 mg/L
• Light Source: Tungsten Lamp
• Light Detector: Silicon Photocell with narrow band interference filter @ 525 nm
• Environment: 0 to 50 degrees C (32 to 122 degrees F)
• Power Supply: (1) 9V Battery
• Auto-off: After 10 minutes of non-use in measurement mode; after 1 hour of non-use in calibration mode; with last reading reminder
• Dimensions: 192 x 102 x 67mm (7.6 x 4 x 2.6")
• Weight: 290 g (10 oz)
• Method: Adaptation of EPA approved method

Unit Ship Weight: 3 lbs