Iron, High Range Photometer Water Resistant W/ CAL CHECK Kit

Iron, High Range Photometer Water Resistant W/ CAL CHECK Kit

Iron is naturally present in water, but in high concentrations it is an indicator of corrosion in the water system. This instrument kit is very useful in checking the overall health of boilers, cooling towers and other water systems. This meter measures the total iron content in water samples in the 0.00 to 5.00 mg/L (ppm) range. The method used is an adaptation of the USEPA Method 315B for natural and treated waters, and Standard Method 3500-Fe B for water and wastewater.

This instrument contains the powerful CAL CHECK validation function which allows you to validate your performance at any time. This whole system is user friendly and with the NIST traceable standards you will be able to verify the performance of the instrument and recalibrate if necessary.

This meter is water resistant and the lamp and filter are protected by a transparent cup, making it ideal for field work. This meter also features an auto-shut off feature that will turn off the instrument after 10 minutes of non-use in measurement mode and after 1 hour of non-use in calibration mode. This meter also has a positive locking system to ensure the cuvets are oriented in exactly the same way each time you test. The meter also allows for cuvets with larger necks to ease the process of adding both reagents and samples. 

This instrument contains the powerful CAL CHECK validation function which allows you to validate your performance at any time. This whole system is user friendly and with the NIST traceable standards you will be able to verify the performance of the instrument and recalibrate if necessary.

This meter is water resistant and the lamp and filter are protected by a transparent cup, making it ideal for field work. This meter also features an auto-shut off feature that will turn off the instrument after 10 minutes of non-use in measurement mode and after 1 hour of non-use in calibration mode. This meter also has a positive locking system to ensure the cuvets are oriented in exactly the same way each time you test. The meter also allows for cuvets with larger necks to ease the process of adding both reagents and samples.

This kit comes with CAL CHECK standard cuvets, 2 sample cuvets with caps, a 9V battery, cuvet cleaning cloth, scissors and an instruction manual all in a hard carrying case.

Specifications

• Range: 0.00 to 5.00 mg/L
• Resolution: 0.01 mg/L
• Precision: +-0.01 mg/L to 1.50 mg/L
• Light Source: Tungsten Lamp
• Light Detector: Silicon photocell with narrow band interference filter @ 525 nm
• Power Supply: (1) 9V Battery
• Auto-off: After 10 minutes of non-use in measurement mode; after 1 hour of non-use in calibration mode; with last reading reminder
• Environment: 0 to 50 degrees C (32 to 122 degrees F); RH max 95% non-condensing
• Dimensions: 192 x 102 x 67mm (7.6 x 4 x 2.6")
• Weight: 290 g (10 oz)
• Method: Adaptation of the USEPA method 315B and Standard Method 3500-Fe B

Unit Ship Weight: 3 lbs