Fluoride, Low Range Photometer Water Resistant W/ CAL CHECK

Fluoride, Low Range Photometer Water Resistant W/ CAL CHECK

This meter will allow you to accurately measure and monitor fluoride levels. Its range is 0.00 to 2.00 mg/L and lets you make sure harmful levels of fluoride are not present. This meter also comes with an automatic pipette. 

This instrument contains the powerful CAL CHECK validation function which allows you to validate your performance at any time. This whole system is user friendly and with the NIST traceable standards you will be able to verify the performance of the instrument and recalibrate if necessary.

This meter is water resistant and the lamp and filter are protected by a transparent cup, making it ideal for field work. This meter also features an auto-shut off feature that will turn off the instrument after 10 minutes of non-use in measurement mode and after 1 hour of non-use in calibration mode. This meter also has a positive locking system to ensure the cuvets are oriented in exactly the same way each time you test. The meter also allows for cuvets with larger necks to ease the process of adding both reagents and samples. 

This instrument contains the powerful CAL CHECK validation function which allows you to validate your performance at any time. This whole system is user friendly and with the NIST traceable standards you will be able to verify the performance of the instrument and recalibrate if necessary.

This meter is water resistant and the lamp and filter are protected by a transparent cup, making it ideal for field work. This meter also features an auto-shut off feature that will turn off the instrument after 10 minutes of non-use in measurement mode and after 1 hour of non-use in calibration mode. This meter also has a positive locking system to ensure the cuvets are oriented in exactly the same way each time you test. The meter also allows for cuvets with larger necks to ease the process of adding both reagents and samples.

The automatic pipette is a fast and precise tool to safely dose liquid reagents. The tip of the pipette can also be changed.

This instrument is supplied with 2 sample cuvets with caps, (1) 9V battery and an instruction manual.

Specifications:

• Range: 0.00 to 2.00 mg/L
• Resolution: 0.01 mg/L
• Precision: +-0.03 mg/L to 1.00 mg/L
• Light Source: Tungsten Lamp
• Light Detector: Silicon photocell with narrow band interference filter @ 575nm
• Environment: 0 to 50 degrees C (32 to 122 degrees F)
• Power Supply: (1) 9V battery
• Auto-off: After 10 minutes of non-use in measurement mode; after 1 hour of non-use in calibration mode; with last reading reminder
• Dimensions: 192 x 102 x 67mm (7.6 x 4 x 2.6")
• Weight: 290g
• Method: Adaptation of the EPA method 340.1 and standard methods for the examination of water and waste water, 20th edition, SPANDS method

Unit Ship Weight: 2 lbs