Chlorine, High Range Photometer Water Resistant CAL CHECK

Chlorine, High Range Photometer Water Resistant with CAL CHECK (Total & Free Chlorine)

This meter permits free and total chlorine analysis up to 10.00 ppm. This instrument is dedicated to monitor overchlorination through to chloramine destruction. This photometer was designed to check chlorine dosing in disinfection processes with high concentrations of chlorine.

This meter contains the powerful CAL CHECK validation function, where users are able to validate performance at any time. This process is very user friendly, especially when used with the NIST traceable standards to verify the performance of the instruments and recalibrate if necessary.

This unit is water resistant and the lamp and filter units are protected by a transparent cup. This meter also features an exclusive positive locking system to ensure the cuvet is in the same orientation for every test. The instrument is also designed to incorporate a wide neck cuvet, easing the addition of both samples and reagents. These cuvets are made from a special optical glass to obtain the best results.

This meter comes with 2 sample cuvets with caps, a 9V battery and instruction manual.  

Specifications:

• Range: Free Chlorine- 0.00 to 10.00 mg/L  Total Chlorine- 0.00 to 10.00 mg/L
• Resolution: 0.01 mg/L (0.10 mg/L above 3.50 mg/L)
• Precision: +-0.06 mg/L to 3.00 mg/L
• Light Source: Tungsten Lamp
• Light Detector: Silicon Photocell with narrow band interference filter @ 525nm
• Power Supply: (1) 9V Battery
• Auto-off: After 10 minutes of non-use in measuring mode; after 1 hour of non-use in calibration mode with last reading reminder
• Environment: 0 to 50 degrees C (32 to 122 degrees F); RH max 95% non-condensing
• Weight: 290g (10 oz)
• Method: Adaptation of the USEPA method 330.5 and Standard Method 4500-Cl G.

Unit Ship Weight: 2 lbs