Ammonia, Medium Range Waterproof Photometer Kit

Ammonia, Medium Range Waterproof Photometer with 466 nm filter/Cal Check - Kit

The kit includes the Water Resistant Ammonia, Medium Range Photometer with CAL CHECK, 2 CAL CHECK standard cuvets with caps, 9V battery, cuvet cleaning cloth and instruction manual in a hard carrying case. This is everything you need to get started testing.

This meter contains an advanced optical system based on a special tungsten lamp and a narrow band interface filter that allows more accurate and repeatable readings. This instrument is calibrated at the factory and the electronic and optical design will minimize the need for frequent calibration. This meter also contains the powerful CAL CHECK validation function. This gives users the ability to validate the performance of the instrument at any point. This feature is also very user friendly and with the NIST traceable standards you will be able to verify the performance and recalibrate if necessary.

This is also a water resistant model with an added bonus of having the LED and filter units protected from dust and dirt by a transparent cup. This will allow for use in the field and outside of the lab. To save on battery power it has an auto-shut off feature that turns off the instrument after 10 minutes of non-use in measurement mode and 1 hour in calibration mode. The positive locking system will keep our cuvet oriented correctly and consistently every time it is put into the measurement cell. The cuvets have a wider top to ease the adding of samples and reagents and are made from a special optical glass that gives the best reads possible.

Specifications:

• Range: 0.00 to 9.99 mg/L (as NH3-N)
• Resolution: 0.01 mg/L for measurement; 0.1 mg/L for Calibration and Validation
• Precision: +-0.12 mg/L @ 6.00 mg/L
• Light Source: LED (Light Emitting Diode)
• Light Detector: Silicon Photocell with Narrow Band Interference filter @ 466 nm
• Environment: 0 to 50 degrees C (32 to 122 degrees F); RH max 95% non-condensing
• Power Supply: (1) 9V Battery
• Auto-off: After 10 minutes of non-use in measuring mode; after 1 hour of non-use in calibration mode with last reading reminder
• Dimensions: 192 x 102 x 67mm (7.6 x 4 x 2.6")
• Weight: 290g (10 oz)
• Method: Adaptation of the ASTM Manual of Water and Environmental Technology, D1426-93, Nessler